Products
Eight devices. One system.
Grouped by how they connect — because that determines the installation, not the marketing. Each page carries the technical specification and the device’s place in the system.
Available from stock. Every inquiry is assessed case by case.
Wireless WBLS®
Devices that run over the air and need no cabling. Built for existing buildings and hotels where a cable is expensive or impossible.
Olock®
Hotel lock with biometric unlocking and no cabling.
Up to 500 fingerprints · 40,000–50,000 openings per battery set · WBLS® · Available from stock
View product Olock®
Inside®WBLS
Reader that sits flush in the wall and drives a lock, door or barrier.
Up to 500 fingerprints · 12 A relay · JUNG frames · Available from stock
View product Inside®WBLS
Gateway®
Gateway that connects wireless devices to the software.
Up to 14 devices · Ethernet + 2.4 GHz · Encrypted link · Available from stock
View product Gateway®
Biodit®Energy
Controller for the electrical circuits of a room.
Up to 4 EnOcean sensors · 2 A 230 V relay · SELV · Available from stock
View product Biodit®EnergyWired devices
Reader and controller over Ethernet and RS485 — for buildings with existing cabling and a requirement for centralized control.
Conik®Access Wall
Surface-mounted biometric reader.
Up to 500 fingerprints · Up to 1 km over RS485 · Online and offline · Available from stock
View product Conik®Access Wall
Driver®Control
Network controller with relay outputs and digital inputs.
4 × 12 A relays · 2 digital inputs · Up to 2 readers · Available from stock
View product Driver®ControlEnrollment
USB devices for enrolling fingerprints — at reception, in the HR office or by the system administrator.
A comparison that matters
Technical columns, not marketing ones. An empty cell means the feature does not apply.
| Device | Connection | Mounting | Fingerprints | Outputs / inputs | Power | Mode |
|---|---|---|---|---|---|---|
| Olock® | WBLS® | On the door, no cabling | 500 (up to 3,000 / 5,000) | Lock control | 3.6 V DC lithium battery | Online / offline |
| Inside®WBLS | WBLS® | Flush in a universal box | 500 (up to 3,000 / 5,000) | 12 A 230 V relay; 1 digital input | 12 V DC / 500 mA | Online / offline |
| Gateway® | Ethernet + WBLS® | Surface | — | Up to 14 WBLS® devices | 12 V DC / 500 mA | Online only |
| Biodit®Energy | EnOcean | Flush (mechanism box, Niessen Zenit frame) | — | 2 A 230 V relay; up to 4 EnOcean sensors | 12 V DC / 500 mA | — |
| Conik®Access Wall | RS485 bus | Surface | 500 (up to 3,000 / 5,000) | To a controller | Over the bus up to 25 m; beyond that 3.6 V DC / 500 mA | Online / offline |
| Driver®Control | Ethernet + RS485 | Surface | — | 4 × 12 A 230 V relays; 2 digital inputs; up to 2 readers | 12 V DC / 1 A | Online only |
| Conik®Roll | USB | Desktop | — | USB | From USB | — |
| Slim®Roll | USB | Desktop | — | USB | From USB | — |
Values come from the device specifications. Full data, including environmental conditions and interfaces, is on each product page.
Which device do I need?
Hotel room, no cable
Olock® + Gateway®
A lock without cabling and a gateway that links it to the software.
Building entrance with centralized control
Conik®Access Wall + Driver®Control
An RS485 reader and a controller with relay outputs for a door, barrier or turnstile.
Office with existing network
Inside®WBLS + Gateway®
A flush reader with a relay and a wireless link to the software.
Documents and support
Technical datasheets are provided on request. For wiring diagrams, certificates and support terms, get in touch.
Not sure which device you need?
Three questions about your site narrow it down to two devices.