Wired devices

Conik®Access Wall — the biometric reader for walls

An access control reader with surface mounting and an RS485 link to a controller up to 1 km away. It works online and offline, with encrypted communication on the bus.

  • Up to 1 km over RS485
  • Up to 500 fingerprints
  • UTP CAT5
Conik®Access Wall

Availability

Available from stock

Available from stock. Every inquiry is assessed case by case.

Delivery
From stock, lead time on confirmation
Book a demo

What it is

Conik®Access Wall is a biometric access control device designed for wall mounting. It gives users fast access to rooms through fingerprint identification, and its design fits any interior.

Connected to a network controller, it provides security and effective control in high-priority areas. It reaches the software through Driver®Control over RS485, at distances up to 1 km.

Key features

  • Fingerprint biometric identification.
  • Surface mounting — simple on any construction.
  • Installation with a single UTP CAT5 cable.
  • Data bus up to 1 km over UTP (an external supply is required beyond 25 m).
  • Encrypted communication between reader and controller over the 485 bus.
  • Requires a controller — Relay Switch or Driver®Control.
  • Compatible with any controller, in online or offline mode.
  • Audible indication on access.

Technical specification

CategoryValues
Biometrics Optical sensor; 18 × 22 mm area; 500 dpi; 1:1 verification under 1 s; 1:500 identification in 1.5 s; up to 500 fingerprints, expandable to 3,000 and 5,000; FAR ≤ 0.00001%
Environment Operating temperature –10 °C to 45 °C; storage –20 °C to 70 °C; relative humidity 20–80%
Power Over the data bus up to 25 m; beyond that an external 3.6 V DC / 500 mA supply
Interfaces Power connector; auxiliary connector; RJ45 for the bus link with the controller
Network 485 bus communication; online and offline operation
Installation Interiors and covered exteriors; surface mounting

Where Conik®Access Wall sits in the system

The reader does not decide on its own — it passes the identification to the controller. That is why it pairs with Driver®Control, which drives the lock, door, barrier or turnstile.

Where it is used

  • Entrances and floors in office buildings.
  • Industrial sites and warehouses — with a controller and relay outputs.
  • Education and administrative buildings with many zones.

Documents

The technical datasheet is provided on request, together with wiring diagrams and support terms.

Request the datasheet

Ask about your site

Tell us the number of entrances and the distance to the controller — we will check whether RS485 covers the site.