Wireless WBLS®
Inside®WBLS — the reader that disappears into the wall
It fits a standard mechanism box and drives an electronic lock, automatic door, parking barrier or turnstile through its built-in relay. It reaches the software through Gateway® over WBLS®.
- Up to 500 fingerprints
- 12 A / 230 V relay
- JUNG LS, LS PLUS, FD frames
Availability
Available from stock
Available from stock. Every inquiry is assessed case by case.
- Delivery
- From stock, lead time on confirmation
- Phone
- +359 2 806 6780
- office@biodit.bg
What it is
Inside®WBLS is a wireless biometric access reader designed for integrated installation. It fits a universal mechanism box and controls electronic locks, automatic doors, parking barriers and turnstiles through its relay.
The device works online and offline, draws very little power and stays on standby until the sensor is activated by someone approaching. Replaceable frames in different colors (JUNG LS, LS PLUS and FD series) let it match any interior.
Key features
- Fingerprint biometric identification.
- Flush installation in a universal mechanism box.
- SELV power supply (safety extra-low voltage).
- Built-in relay for a door opener or any other actuator.
- Relay in bistable or pulse mode, with adjustable pulse time.
- Two-way encrypted communication with the software, with cyclic redundancy checks.
- Restraint fingerprint function.
- Audible and visual indication on access.
Opening modes
- Identification
- Opening after a validated fingerprint.
- Time-band access
- Permissions valid in set intervals.
- Remote opening
- Opened from the software.
Technical specification
| Category | Values |
|---|---|
| Biometrics | Optical sensor; 18 × 22 mm area; 500 dpi; 1:1 verification under 1 s; 1:500 identification in 1.5 s; up to 500 fingerprints, expandable to 3,000 and 5,000; FAR ≤ 0.00001% |
| Environment | Operating temperature –10 °C to 45 °C; storage –20 °C to 70 °C; relative humidity 20–80% |
| Power | 12 V DC / 500 mA; low consumption, standby mode |
| Interfaces | Power connector; 12 A 230 V relay output (NC/NO); digital input for an external sensor |
| Network | WBLS®; online and offline operation |
| Installation | Flush in a universal mechanism box; JUNG LS, LS PLUS and FD frames |
Where Inside®WBLS sits in the system
The reader is both the identification endpoint and the output: it reads the fingerprint and switches a lock or an actuator. It reaches the software through Gateway®.
Where it is used
- Hotel and office entrances where cabling is awkward or costly.
- Buildings with a single interior design language — thanks to the JUNG frames.
- Sites where the reader must drive a lock, door, barrier or turnstile directly.
Documents
The technical datasheet is provided on request, together with wiring diagrams and support terms.
Ask about your site
Tell us what the reader must drive — a lock, door, barrier or turnstile — and we will propose a configuration.